Adirondack Guideboat--Stripper

From: Steve Durham  llpenguins@citlink.net 

Chuck:
Attached are the first few photographs of the Adirondack Guideboat--Stripper I am attempting to manufacture. Feel free to edit the following as you wish.  

click to enlarge
Strongback (upside down) with the last rib-station penciled in.
click to enlarge
Strip starting.
click to enlarge
Strip continuing.
click to enlarge
click to enlarge
Stripping completed.
click to enlarge
Staples and screws removed.
click to enlarge
First layer of epoxy and
fiberglass on the hull.
click to enlarge
Trimmed and removed from strongback.
click to enlarge
 Interior sanding.
click to enlarge
Fiberglass laid in.
click to enlarge
Interior after addition of epoxy.
click to enlarge
Interior with seat mounts and
inboard gunnel work.

More photo's to come as work progresses.

Thanks