Obsolete Outboards click here to read or make an observation about this  article

by Max Wawrzyniak - St Louis, Missouri - USA

 

Paperwork

Having the correct paperwork makes any job easier, and that is especially true in regards to working on old outboard motors. A bit of printed information can take much of the mystery out of repairs, just as the proper chart can greatly aid in navigating unfamilar waters.

The first sort of paper work associated with outboard motors are owner's manuals. These are rather basic guides to the operation and maintenance of a particular outboard model. For those unfamilar with outboards motors, an operator's manual can be very useful, providing such information as how to properly mount the outboard on the boat, starting and operating instructions, gasoline/oil mixing instructions, lower unit lubrication information, and other general maintenance items. If your outboard comes with the original owner's manual, that is a good sign that the motor MIGHT have received good care, but it is certainly no guarantee of same. If your engine did not come with an owner's manual, I don't know if I would spend much money trying to obtain a copy, as the money might be better spent on other paperwork.

click to enlarge

Any job goes smoother with the correct paperwork for the job at hand.

(click images for larger views)

Such as a service manual. A service manual gives much more info on repairs than an owner's manual does, but usually does not give too much info on routine maintenance. The owner of an old outboard motor has a choice when it comes to service manuals: one can obtain a copy of a factory service manual, or one can get an aftermarket version of a service manual. While the factory service manual is a much more complete and all-encompassing text, most owners of old outboards are not really interested in performing major overhauls of their engines, so the extra material may not really justify the extra cost of a genuine factory service manual.

click to enlargeOwner's manuals don't really contain much information, but if you are new to outboard motors, an owner's manual can be a very handy item to have. If one comes with your engine, so much the better, but if you would have to buy one, you might be ahead putting the cash towards a service manual.

Factory service manuals come in two flavors: a big, thick manual (or set of manuals) that covers the whole engine line or a major portion of the engine line, or a much slimmer factory service manual that covers just a specific model. For the casual outboard tinkerer, it is hard to justify the cost of the "monster" manual. Copies of OMC factory service manuals can often be obtained from the Ken Cook Company.

click to enlargeA Seloc Johnson/Evinrude service manual, covering models from 1956 to 1970, next to a Glenns service manual for 1960's era Sears outboard motors. While I generally would not recommend a 1960's Sears outboard for the cheap power seeker, there is nothing worng with the Glenns series of aftermarket service manuals, should you happen to run a across one. Since your old outboard is not the "latest edition," your manual certainly does not need to be either.

Then there are the aftermarket manuals. These manuals, printed by publishers with no affiliation with the motor manufacturer, come in two versions that are of interest to us, since we are primarily interested in old OMC (Outboard Marine Corporation) manufactured motors. The first version covers only OMC outboards and is close to the factory service manual as to depth of information, while the second type of aftermarket service manual covers many brands of outboard motors, but in much less depth. Either of these manuals will provide the novice old outboard repairman with sufficient info for the repairs that he is likely to want to tackle.

A copy of Intertec's "Old Outboard Motor Service Manual" (covering many brands of older outboard motors) and Clmer's Evinrude-Johnson service manual, covering years 1956 to 1972. That's an Intertec manual opened up to show the pretty pictures click to enlarge

Examples of the first type of aftermarket manual are one published by Seloc which covers Johnson and Evinrude outboards of 1.5 hp to 40 hp, 1956 to 1970. Clymer also publishes a similar manual, covering Johnson and Evinrude outboards of 1.5 hp to 125 hp, 1956 to 1972. My copies of these manuals are a few years old, and current versions might differ a bit. Used copies can often be found through the online used book purveyors. Both of these manuals are a good source of repair information and they can usually be bought for less money than the offical factory service manual.

click to enlargeThese are older "Abos" versions of the Intertec service manual, but are not labeled as manuals for "old" outboards because the outboards were almost "new" when these editions were printed. The blue one I picked up for, I think, about 25 cents as library surplus almost 30 years ago, while the other one came with an old outboard I bought maybe 6 years ago.

Intertec's "Old Outboard Motor Service Manual" is an example of the later type, covering many brands of outboards manufactured from about 1955 until about 1968. Volume #1 covers outboards of under 30 hp, while volume #2 covers 30 hp and over. Note that Interec also publishes these manuals for newer engines; if your engine is 1969 or older, you want the "Old outboard" manual. Earlier versions of this same manual were published under the Abos Publishing name.

Parts diagrams for 1958 Evinrudes. The "exploded views" come in real handy when taking things apart and putting them back together. Locating replacement parts is also easier when you have the part number and the parts counter man (or woman) does not have to look it up. click to enlarge

The next bit of helpful paperwork is the parts diagram, alternately referred to as a parts break-down or "exploded view." This is a drawing showing all the parts of the outboard and their relationships to each other, and also lists the factory part number for each part. A parts diagram can be very helpful during dissasembly and reassembly, as the drawing shows how the parts all fit together, and if you need replacement parts having the part numbers can be a big help in locating what you need. There are no aftermarket parts diagrams available, but usually a factory parts list can be bought from the Ken Cook company, and an inquiry on a old outboard motor discussion group or chat page will often result in someone e-mailing a scaned copy. I have e-mailed parts diagrams many times (a statement that should not be construed to mean that I will make a full-time job of it !)

click to enlarge

Service bulletins are virtually unobtainable, but are hardly necessary for the casual obsolete outboarder. They do make interesting reading at times. The one on the right lists full throttle RPM's for outboards running test propellers (see Propellers column) in a test tank.

The last bit of helpful paperwork, and the most difficult to find, are the service bulletins, which were notices sent by the factory to dealer service departments from time to time to advise of particular problems with certain engines, or to advise of changes in engines or to inform the service departments of new repair procedures. Service bulletins generally were not available to the general public when printed, and as far as I know reprints of service bulletins affecting old engines are not avialable from any source. Over the years I have managed to collect quite a few (but not all) service bulletins afffecting OMC-built outboards of the 1950's and 1960's. I bought these at swap meets and from closed outboard dealerships and have spent many an evening reading them (shows how exciting my life is). But in addition to useful information, one can often find fascinating stories contained within these service bulletins; for example, Evinrude brought out a new model 15 hp outboard for 1955 and immediately began experiencing problems with water climbing up the vertical driveshaft and getting into the lower crankshaft bearing, causing the bearing to rust. A series of service bulletins describes the problem and recommend a fix, while providing details as to how later engines were modified to correct the problem. So maybe it's not "War and Peace:" I still think it's interesting.

Years of collecting parts manuals, service manuals and service bulletins. These binders are just those items I have gotten around to organizing; there is still a bit of a pile that i need to work through. click to enlarge

While very useful, chances are you are not going to get any service bulletins for your particular engine, but with a parts diagram and some sort of service manual in had, you will still be well prepared to deal with your old outboad motor. And don't forget that with discussion groups and chat pages, help with an outboard problem is usually only a "post" or two away.

click here for a list of Columns by Max Wawrzyniak